There are multiple services that allow files to be shared between computers. This note uses OneDrive because it's free, relatively easy to set up, and included by default with Windows. Other than this general preference, we have no other connection to OneDrive; if you already use a different service and are happy with it, this note is in no way intended to encourage you to swtich services.
-These steps require some experience in navigating the files and folders on your computer; since the various cloud storage services available may be installed in different places, we strongly suggest to make sure you are familiar with where these folders are installed, and how to navigate to them, before trying to set this up.
-This isn't something Toolkit was originally built for. While it has worked on some of our personal computers, it is possible that you may run into some database issues if you have two copies of Toolkit open at the same time, or if you open one copy while the database file is still being updated on the computer.
For this reason, we urge you to always check and make sure that you only have one copy of Toolkit open at a time, and that you double-check the folder where the database is kept, to make sure that it is not in the process of being updated when you open Toolkit.
First, the basic steps:
Note: you won't lose any stocks that were in the original libraries; the secondary copy of Toolkit will simply start using the database from the primary copy instead of its own. If you have stocks in the secondary copy that aren't in the primary one, you should go to File > Export in the secondary copy, and make individual exports of those stocks.
If you don't already have OneDrive set up on both computers, go to www.onedrive.com and make sure you get the software installed and set up on both computers.
First, make sure you have the Library menu enabled on both copies of Toolkit. This is turned off by default, so here's a quick how-to on making sure it's active:
While it's possible to move the database, we prefer to make a copy, in case you need to revert back to it for any reason.
You'll want to check that the file has been uploaded to the OneDrive server. To do this, find your One Drive folder, open it up, and check the mark in the Status column.
If the file you saved has a small green and white check-mark next to it, then the file is all set on the primary computer. If you see a small blue symbol, that means the file is copying over to the server; this usually shouldn't take more than a minute or so. If it seems to take a few minutes, try restarting the computer; sometimes a file will not be copied while the software that was using it (Toolkit6) has been closed. Otehr times the folder itself may not update the display as soon as the file has been copied.
With this done, go to the secondary computer, and check your Shared Toolkit Library folder there; depending on the speed of your internet connection, and the size of the database, the file may take a minute or two before it shows up.
Once you have confirmed that the file has shown up, continue with the steps below.
Your secondary copy of Toolkit will now be using the same library as the primary copy.
Again, we strongly suggest to make sure that you do not have Toolkit open on both computers at the same time, so there is no confusion in the program about which copy of Toolkit will be writing/updating the database. As well, make sure to check the Toolkit databse file in your Shared Toolkit Library folder when moving from one computer to another, to make sure that it shows a green check-mark on the file, indicating that it is up to date.